Universal Detachable Medium Strength Liquid Anaerobic Adhesive

• Customization: Available
• Bonding Function: Oil Level Adhesive
• Morphology: Water Emulsion
• Model NO.: 242
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Blue
• Model No.: 243
• Capacity: 50ml, 250ml
• Viscosity: 1, 300/3, 000MPa.S
• Removable: Yes
• Temperature Range: -54 to 150 Degree
• Full Cure Time: 3h
• Shelf Life: 3 Years
• Average Break Away Torque: 7 N.M
• Average Destroy Torque: 20 N.M
• Density: 1.08g/Ml
• OEM: Yes
• Transport Package: Box and Carton
• Specification: 62.5*32.5*9.5cm
• Trademark: HiGlue
• Origin: China
• Production Capacity: 5000000PCS/Year
• Package Size: 62.50cm * 32.50cm * 18.00cm
• Package Gross Weight: 9.000kg

Product Description

  
Product Introduction:
Threadlockers, a type of anaerobic adhesive, can inexpensively and permanently prevent threaded fastener failures. is a unique liquid resin that hardens (or cures) to a tough solid when exposed to metal ions in the absence of air.
Thread locking agent is a one-component sealing adhesive made by using the principle of oxygen to free radical inhibition, which can be used for both bonding and sealing. When the glued surface is isolated from the air and catalyzed, it can be quickly polymerized and solidified at room temperature.

Curing Features:
1. The curing shrinkage rate is less, and the stress at the glue interface is small.
2. Curing at room temperature, and some glue joints can even be used at higher temperatures, which can save energy and facilitate assembly line operations.
3. The bonding strength of the glue varies widely, which is convenient for users to choose.
4. The thread agent is a one-component glue, which is stable in quality, easy to use, does not stain other containers, saves the amount of glue used, and has no waste.
5. Good permeability, vibration absorption and sealing.
6. Non-volatile, no pollution when used.
7. The glue of the outer glue seam where the glue joint is in contact with the air is not cured, and it is easy to remove.
8. The shelf life is more than one year, which is convenient for use in production.

HiGlue 243 Threadlocker 10ml 50ml 250ml
Thread locker 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.

Product Name:	Threadlokcer Glue
Model No.:	242
Capacity:	10ml,50ml,250ml
Color:	Blue
Strength:	Medium strength
Removable:	YES
Curing Time:	initial 10min,full 3h
Temperature:	minus 54 to 150°C
Features:	Universal ,detachable,certain lubricity
Substrates:	suitable for all metals include inert surface, like stainless steel, aluminum or plated surface

HiGlue Threadlocker Anaerobic adhesive:222 242 243 262 263 270 271 272 277 290 204 
A threadlocker is an anerobic adhesive used on threaded metals that cures at room temperature in the absence of air. The adhesive completely fills the gaps between mating threads to lock and seal the threaded assembly.
 

Product No.	Capacity	Color	Strength	Removable	Curing Time	Temperature		Features	Substrates
222	10ml 50ml 250ml	Purple	Low strength	Yes, with common tool	initial 20min, full 24h	minus 54 to 150°C		Easy disassemble with common tools	suitable for all metals include inert surface, like stainless steel, aluminum or plated surface
242	10ml 50ml 250ml	Blue	Medium strength	Yes, with common tool	initial 20min, full 24h	minus 54 to 150°C		Easy disassemble with common tools	suitable for most metals, like steel, brass and stainless steel
243	10ml 50ml 250ml	Blue	Medium strength	Yes	initial 10min, full 3h	minus 54 to 150°C		Fast Curing;Oil resistance	suitable for all metals include inert surface, like stainless steel, aluminum or plated surface
262	10ml 50ml 250ml	Red	High strength	Yes	initial 20min, full 10h	minus 54 to 150°C		> Permanent locking and seal > High performance > Solvent resistance > Anti-rust and anti-corrosion	suitable for most metals, like steel, brass and stainless steel
271	10ml 50ml 250ml	Red	High strength	Yes	initial 20min, full 24h	minus 54 to 150°C		Permanent locking and seal	suitable for most metals, like steel, brass and stainless steel
272	10ml 50ml 250ml	Orange red	High strength	Yes,under hoting conditions	initial 30min, full 24h	minus 54 to 230°C		High temperature resistance	suitable for most metals, like steel, brass and stainless steel
277	10ml 50ml 250ml	Red	High strength	Yes,under hoting conditions	initial 30min, full 12h	minus 54 to 150°C		> Permanent locking and seal > Anti-rust and anti-corrosion	suitable for most metals, like steel, brass and stainless steel
290	10ml 50ml 250ml	Green	Infiltrate	Yes,under hoting conditions	initial 30min, full 6h	minus 54 to 150°C		> Infiltrate > Anti-rust and anti-corrosion	suitable for all metals
204	500g	pink/red/ yellow/ blue/green	High strength	Yes	72h	minus 54 to 150°C		Pre-applied threadlocker glue	Substrates: suitable for all metals include inert surface, like stainless steel, aluminum or plated surface

Threadlocker Instructions for Use:
1. Before sizing, clean up the oil on the surface of the sizing part, etc., and dry the surface.
2. When the curing speed is very slow or the gap is large, an accelerator can be used on the surface to speed up the curing speed.
3. For a snug fit, simply apply a bead of glue around the chamfer of the shaft and bushing, turning as you assemble to ensure good application.
4. For a press fit, both surfaces to be bonded need to be fully coated and fitted with proper pressure.
5. For shrink fit, glue should be applied to the shaft, then the sleeve is heated to create enough clearance to fit freely.
6. Do not apply any applications to parts until they have reached sufficient operating strength.

Precautions:
1. When using, be careful not to splash into the eyes and skin. If you accidentally touch it, rinse it with clean water immediately and send it to the hospital for treatment.
2. Pay attention to ventilation when using.
3. Store out of reach of children.
4. Store in a cool and dry place (10°C-22°C).
5. Shelf life: one year
6. When using, it is necessary to take good protection and avoid direct contact with the skin. If it touches the skin, it will cause allergic symptoms. In mild cases, itching and eczema will occur, and in severe cases, it will directly ulcerate.
 

Praise

 

Jiangxi Gooz Adhesive Co., Ltd
We are an innovative enterprise based on research and development, production and marketing. Over 20 years experience helps us take a leading position in adhesive filed. We supply good and stable quality glue for clients all over the world. Now we have a various business network over Middle East, Europe, America, Southeast Asia and our own mainland. And won great reputation among them. We cherish our long term cooperation relationship with old clients, and also looking forward to develop more businesses with new clients.

Products as below:
1. HiGlue liquid thread locker glue: 222 242 243 262 270 271 272 277 290
2. HiGlue pipe thread sealant: 545 554 565 567 569 577 542 561 L55
3. HiGlue instant super glue: 380 401 403 406 407 410 411 412 454 460 480 495 496
4. HiGlue flange/ plane sealant: 510 515 518 5182 5208 573 574
5. HiGlue silicone rubber: 207 587 593 594 595 596 598 5020 5699 5900
6. HiGlue retaining compound: 603 609 620 638 641 648 660 680
7. HiGlue surface treatment: 7075 7452 7649 7387 7471 770 754 790
8. HiGlue epoxy metal putty (Iron, Steel, Aluminum, Copper): 111 112 113 114
9.HiGlue mutil-purpose epoxy putty stick




Why Choose Us
1.We are factory,can supply you competetive price.
2.We have almost 20 years experiences on producing the adhesives,Means we can supply you correct suggestions.
3.Our products on adhesives field is very completely.
4.Accept small orders.
5.OEM are welcome.
6.We will reply your inquiry in 24 hours.

FAQ:
1,  Q: Are you factory or trading company?
     A: We are factory which have 20 years of experience, and provide you direct prices.
2,  Q: Can I be your agent?
     A: Sure, we are looking for agent all over the world.
3,  Q: Can I get a sample before mass production?
     A: Of course! FREE SAMPLE, after you confirm, when we will start production.
4,  Q: How long can I got this sample?
     A: Normally 5-10 days after receiving your Freight.
5,Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.