| Customization: | Available |
|---|---|
| CAS No.: | 1344281 |
| Formula: | Mix |
|
Still deciding? Get samples of US$ 160/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Epoxy Coating Ceramic Wearing Compound
China Direct Factory PC9313 Grey Wearing Compound
Ceramic beads filled epoxy repair putty is made up of high performance wear resistant and wear resistant ceramic particles and modified toughening and heat-resistant resin.
| Name | High Impact Wearing Compound PC 9313/ 11479/11497 |
| Appearance(Resin) | Grey |
| Appearance(Hardener) | Dark Grey |
| Mix Ration(Weigth/ Volume) | 7:3 |
| Application Teperature | 10-40 Degree |
| Benefit | 1. Ceramic- Filled for outstanding resistance to abrasion 2. Resists mild impact at 45° angles 3. Extends wear life- resists sliding abrasice wear and elimicates costly wear part inventory |
1. Clean, dry and abrade application surface. The more thorough the degree of surface preparation the better the performance of the application.
2. To blend the hardener into main agent according to the provisions of the ratio, and using a mixer to mix evenly. In the meantime, using a scraper or other tools to remove the unmixed base or hardener carefully.
3. In the middle of mixing, DO NOT mix with any other water.
4. After mixing, soak the hands, apply a small amount of epoxy coating material to coat on the surface, and evenly smear the coating (Wetting manual method).
5. Whether steel, aluminum, stainless steel and concrete, must have the appropriate surface roughness.
6. All substrates should be clean and free from dirt and dirt that may adversely affect adhesion.
7. The construction tools should be washed immediately after using.
Jiangxi Gooz Adhesive Co., Ltd
){kind=link}