Rugged Alloy Steel Casting Mining Machinery Parts Cone Crusher Liner Filler Mantle Backing Compound

• Customization: Available
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Bonding Function: Structural Adhesive
• Model NO.: Backing compound
• Color: Grey
• Composition: Organic Material
• Morphology: Paste
• Name: Ceramic Epoxy
• Certificate: MSDS, TDS
• OEM Service: Yes
• Shelf Life: 1 Year
• Capacity: 30000tons/Month
• Curing Time: 7 Hr
• Maximum Operating Temperature: +250 °f
• Package Quantity: 1 Per Case
• Product Form: Putty
• Resistant Properties: Corrosion-Resistant
• Material: Epoxy
• Classification: Room Curing
• Characteristic: Waterproof
• EINECS: 230-391-5
• Main Agent Composition: Epoxy
• Promoter Composition: Epoxy
• Formula: Mixture
• CAS No.: 7085-85-0
• Transport Package: Carton Case
• Specification: 10kg/set, 20kg/set
• Trademark: Higlue
• Origin: China
• Production Capacity: 1000 PCS a Week

Product Description

Rugged Alloy Steel Casting Mining Machinery Parts Cone Crusher Liner Filler Mantle Backing Compound
 

 

Description:

 

The filling material is a two-component epoxy based filler with high density, high impact resistance and low shrinkage, which is developed based on the Polycon composite technology platform. It is used for filling and sealing the gap between the lining plate and the body of cone type or rotary crusher, providing high impact resistance on the back, protecting the lining plate from impact damage and extending the service life, which is the preferred measure for many mine crushing workshops.

 

Use: Rotary crusher, cone crusher, ball mill and other lining plate or equipment base need gap sealing, casting filling, reinforcement occasions.

 

Product features: Excellent impact resistance on the back Low shrinkage rate High strength and toughness Adapted to wide weather conditions Low temperature curing speed is fast Good liquidity

 

Typical application: Rough breaking, medium breaking and fine breaking in mine crushing workshop

Specification

The following technical parameters are for reference only and do not serve as technical specifications. Temperature 20ºC

 

color	Milky white	Test standard
Mixing ratio (weight)	Principal agent 10: curing agent 1
Operating time (23ºC)	15-20 minutes
Curing time (23ºC)	4-6 hours
Compressive strength	>165MPa	ASTM D695
Impact strength	> 13.5 KJ/m2	ISO179
Shear strength	>361kg	ASTM D790
Tensile strength	47.3 MPa	ASTM D638
density	1500kg/ m3
Hardness after curing (Shaw D)	89	ASTM D2240
viscosity	16000cps
Shrinkage rate	0.01%

Instructions for use:

Polycon backlining filler is an epoxy resin based backlining material, consisting of components A and B. In low temperature and cold areas, it needs to be stored at room temperature for 24 hours before use. At low temperature, the viscosity will become larger, and when the temperature exceeds 30 degrees Celsius, the operation time will become shorter and the reaction curing speed will be accelerated. When the temperature is below 10 degrees, the corresponding curing time is extended Mixed specification Mixing ratio weight ratio (main agent: hardener) 10:1, this product hardener for two parts, easy to mix according to the actual dosage, so as not to cause waste. It is strongly recommended to mix all at once with one part of the hardener on. 1. When stirring, the main agent and curing agent can be mixed according to the weight ratio of 10:1, and the curing agent can be added to the main agent. 2. Use a blender to stir the material thoroughly (continuously scraping the side and bottom mixture of the container) until it is evenly mixed, but the time should not exceed 10 minutes.

Company profile:

Jiangxi Gooz Adhesive Co.,Ltd,is a leading manufacturer of industrial adhesive products
established in 1996,the adhesive products main is sell to foreign country,and received
many praises.Our main products:
Threadlocker,pipe thread sealing cord,intant adhesive,epoxy adhesive,tile adhesive 
surface treatmet etc..

FAQ
 

Q1: Are you a factory or a trading company?
Of course, we are a Factory.

Q2: Can you provide the samples? 

Yes, we can. The sample is free, and you only need bear the freight.

Q3: How long can I got sample?

The sample time is 5-7 days and express delivery usually needs 5-7 day.

Q4: Production period and delivery time?

3 days to 7 days.

Q5: What's your MOQ (min order quantity) ?

Our MOQ is 10 barrels.

Q6: How can you control of product quality?

We have experienced and skilled labors and QC team. Goods are 100% inspection before packing.