| Bonding Function: | Liquid Sealing Leak |
|---|---|
| Morphology: | Water Emulsion |
| Application: | Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing |
| Material: | Acrylic |
| Classification: | Room Curing |
| Main Agent Composition: | Natural Polymer |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Product Introduction:
The precoated thread locking agent has a microcapsule containing an adhesive that is pre-applied to the thread of the component as a dry film. When the fasteners are assembled, the capsules are crushed, releasing the adhesive.
Curing Features:
1. The curing shrinkage rate is less, and the stress at the glue interface is small.
2. Curing at room temperature, and some glue joints can even be used at higher temperatures, which can save energy and facilitate assembly line operations.
3. The bonding strength of the glue varies widely, which is convenient for users to choose.
4. The thread agent is a one-component glue, which is stable in quality, easy to use, does not stain other containers, saves the amount of glue used, and has no waste.
5. Good permeability, vibration absorption and sealing.
6. Non-volatile, no pollution when used.
7. The glue of the outer glue seam where the glue joint is in contact with the air is not cured, and it is easy to remove.
8. The shelf life is more than one year, which is convenient for use in production.
500g Pre-applied DRI 204 Red Thread Sealant + P2 Activator
HiGlue DRI 204 Threadlocker is a preapplied threadlocking adhesive provides excellent resistance to vibration loosening on any threaded fastener including nuts. Designed for plated and stainless steel fasteners. High dried adhesion, high strength.
BENIFITS:
• Replace mechanical washers and fasteners.
• Prevent loosening caused by vibration, mechanical and thermal shock.
• Lubricate for easier assembly.
| Product Name: | Pre-applied Threadlokcer Glue | ||
| Model No.: | 204 | ||
| Capacity: | 500g | ||
| Color: | pink/red/yellow/blue/green | ||
| Strength: | High strength | ||
| Removable: | YES | ||
| Curing Time: | 72h | ||
| Temperature: | minus 54 to 150°C | ||
| Features: | Pre-applied | ||
| Substrates: | Substrates: suitable for all metals include inert surface, like stainless steel, aluminum or plated surface | ||
Threadlockers are widely used in automobiles, machinery, electronics, electrical appliances, hardware threadlocking, pipe thread sealing, locknuts, bolts and screws.
Pre-coated thread Glue 204 Instructions:
1. When using, be careful not to splash into the eyes and skin. If you accidentally touch it, rinse it with clean water immediately and send it to the hospital for treatment.
2. Pay attention to ventilation when using.
3. Store out of reach of children.
4. Store in a cool and dry place (10°C-22°C).
5. Shelf life: one year
6. When using, it is necessary to take good protection and avoid direct contact with the skin. If it touches the skin, it will cause allergic symptoms. In mild cases, itching and eczema will occur, and in severe cases, it will directly ulcerate.
HiGlue Threadlocker Anaerobic adhesive: 222 242 243 262 263 271 272 277 290 204
| Product No. | Capacity | Color | Strength | Removable | Curing Time | Temperature | Features | Substrates | |
| 222 | 10ml 50ml 250ml |
Purple | Low strength | Yes, with common tool |
initial 20min, full 24h |
minus 54 to 150°C | Easy disassemble with common tools | suitable for all metals include inert surface, like stainless steel, aluminum or plated surface | |
| 242 | 10ml 50ml 250ml |
Blue | Medium strength | Yes, with common tool |
initial 20min, full 24h |
minus 54 to 150°C | Easy disassemble with common tools | suitable for most metals, like steel, brass and stainless steel | |
| 243 | 10ml 50ml 250ml |
Blue | Medium strength | Yes | initial 10min, full 3h |
minus 54 to 150°C | Fast Curing;Oil resistance | suitable for all metals include inert surface, like stainless steel, aluminum or plated surface | |
| 262 | 10ml 50ml 250ml |
Red | High strength | Yes | initial 20min, full 10h |
minus 54 to 150°C | > Permanent locking and seal > High performance > Solvent resistance > Anti-rust and anti-corrosion |
suitable for most metals, like steel, brass and stainless steel | |
| 271 | 10ml 50ml 250ml |
Red | High strength | Yes | initial 20min, full 24h |
minus 54 to 150°C | Permanent locking and seal | suitable for most metals, like steel, brass and stainless steel | |
| 272 | 10ml 50ml 250ml |
Orange red | High strength | Yes,under hoting conditions | initial 30min, full 24h |
minus 54 to 230°C | High temperature resistance | suitable for most metals, like steel, brass and stainless steel | |
| 277 | 10ml 50ml 250ml |
Red | High strength | Yes,under hoting conditions | initial 30min, full 12h |
minus 54 to 150°C | > Permanent locking and seal > Anti-rust and anti-corrosion |
suitable for most metals, like steel, brass and stainless steel | |
| 290 | 10ml 50ml 250ml |
Green | Infiltrate | Yes,under hoting conditions | initial 30min, full 6h |
minus 54 to 150°C | > Infiltrate > Anti-rust and anti-corrosion |
suitable for all metals | |
| 204 | 500g | pink/red/ yellow/ blue/green |
High strength | Yes | 72h | minus 54 to 150°C | Pre-applied threadlocker glue | Substrates: suitable for all metals include inert surface, like stainless steel, aluminum or plated surface | |
Jiangxi Gooz Adhesive Co., Ltd
1,Q: Are you factory or trading company?
A: We are factory which have 28 years of experience, and provide you direct and competitive prices.
2,Q: Can I be your agent?
A: Sure, we are looking for agent all over the world.
3,Q: Can I get a sample before mass production?
A: Of course! FREE SAMPLE, after you confirm, then we will start production.
4,Q: How long can I got this sample?
A: Normally 5-10 days after receiving your Freight.
5,Q: How about your delivery time?
A: 10-30 working days
6,Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
7,Q: How about the quality grantee period?
A: One year.
8,Q: OEM is available?
A: Yes.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}