Customization: | Available |
---|---|
Bonding Function: | Liquid Sealing Leak |
Morphology: | Water Emulsion |
Still deciding? Get samples of US$ 3/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Introduction:
Threadlockers, a type of anaerobic adhesive, can inexpensively and permanently prevent threaded fastener failures. is a unique liquid resin that hardens (or cures) to a tough solid when exposed to metal ions in the absence of air.
Thread locking agent is a one-component sealing adhesive made by using the principle of oxygen to free radical inhibition, which can be used for both bonding and sealing. When the glued surface is isolated from the air and catalyzed, it can be quickly polymerized and solidified at room temperature.
Curing Features:
1. The curing shrinkage rate is less, and the stress at the glue interface is small.
2. Curing at room temperature, and some glue joints can even be used at higher temperatures, which can save energy and facilitate assembly line operations.
3. The bonding strength of the glue varies widely, which is convenient for users to choose.
4. The thread agent is a one-component glue, which is stable in quality, easy to use, does not stain other containers, saves the amount of glue used, and has no waste.
5. Good permeability, vibration absorption and sealing.
6. Non-volatile, no pollution when used.
7. The glue of the outer glue seam where the glue joint is in contact with the air is not cured, and it is easy to remove.
8. The shelf life is more than one year, which is convenient for use in production.
HiGlue 243 Threadlocker 10ml 50ml 250ml
Thread locker 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.
Product Name: | Threadlokcer Glue | ||
Model No.: | 243 | ||
Capacity: | 10ml,50ml,250ml | ||
Color: | Blue | ||
Strength: | Medium strength | ||
Removable: | YES | ||
Curing Time: | initial 10min,full 3h | ||
Temperature: | minus 54 to 150°C | ||
Features: | Fast Curing; Oil resistance | ||
Substrates: | suitable for all metals include inert surface, like stainless steel, aluminum or plated surface | ||
Threadlockers are widely used in automobiles, machinery, electronics, electrical appliances, hardware threadlocking, pipe thread sealing, locknuts, bolts and screws.
1. Before sizing, clean up the oil on the surface of the sizing part, etc., and dry the surface.
2. When the curing speed is very slow or the gap is large, an accelerator can be used on the surface to speed up the curing speed.
3. For a snug fit, simply apply a bead of glue around the chamfer of the shaft and bushing, turning as you assemble to ensure good application.
4. For a press fit, both surfaces to be bonded need to be fully coated and fitted with proper pressure.
5. For shrink fit, glue should be applied to the shaft, then the sleeve is heated to create enough clearance to fit freely.
6. Do not apply any applications to parts until they have reached sufficient operating strength.
1. When using, be careful not to splash into the eyes and skin. If you accidentally touch it, rinse it with clean water immediately and send it to the hospital for treatment.
2. Pay attention to ventilation when using.
3. Store out of reach of children.
4. Store in a cool and dry place (10°C-22°C).
5. Shelf life: one year
6. When using, it is necessary to take good protection and avoid direct contact with the skin. If it touches the skin, it will cause allergic symptoms. In mild cases, itching and eczema will occur, and in severe cases, it will directly ulcerate.
HiGlue Threadlocker Anaerobic adhesive: 222 242 243 262 263 270 271 272 277 290
Product No. | Capacity | Color | Strength | Removable | Curing Time | Temperature | Features | Substrates | |
222 | 10ml 50ml 250ml |
Purple | Low strength | Yes, with common tool |
initial 20min, full 24h |
minus 54 to 150°C | Easy disassemble with common tools | suitable for all metals include inert surface, like stainless steel, aluminum or plated surface | |
242 | 10ml 50ml 250ml |
Blue | Medium strength | Yes, with common tool |
initial 20min, full 24h |
minus 54 to 150°C | Easy disassemble with common tools | suitable for most metals, like steel, brass and stainless steel | |
243 | 10ml 50ml 250ml |
Blue | Medium strength | Yes | initial 10min, full 3h |
minus 54 to 150°C | Fast Curing;Oil resistance | suitable for all metals include inert surface, like stainless steel, aluminum or plated surface | |
262 | 10ml 50ml 250ml |
Red | High strength | Yes | initial 20min, full 10h |
minus 54 to 150°C | > Permanent locking and seal > High performance > Solvent resistance > Anti-rust and anti-corrosion |
suitable for most metals, like steel, brass and stainless steel | |
271 | 10ml 50ml 250ml |
Red | High strength | Yes | initial 20min, full 24h |
minus 54 to 150°C | Permanent locking and seal | suitable for most metals, like steel, brass and stainless steel | |
272 | 10ml 50ml 250ml |
Orange red | High strength | Yes,under hoting conditions | initial 30min, full 24h |
minus 54 to 230°C | High temperature resistance | suitable for most metals, like steel, brass and stainless steel | |
277 | 10ml 50ml 250ml |
Red | High strength | Yes,under hoting conditions | initial 30min, full 12h |
minus 54 to 150°C | > Permanent locking and seal > Anti-rust and anti-corrosion |
suitable for most metals, like steel, brass and stainless steel | |
290 | 10ml 50ml 250ml |
Green | Infiltrate | Yes,under hoting conditions | initial 30min, full 6h |
minus 54 to 150°C | > Infiltrate > Anti-rust and anti-corrosion |
suitable for all metals | |
204 | 500g | pink/red/ yellow/ blue/green |
High strength | Yes | 72h | minus 54 to 150°C | Pre-applied threadlocker glue | Substrates: suitable for all metals include inert surface, like stainless steel, aluminum or plated surface |
Jiangxi Gooz Adhesive Co., Ltd
1,Q: Are you factory or trading company?
A: We are factory which have 28 years of experience, and provide you direct and competitive prices.
2,Q: Can I be your agent?
A: Sure, we are looking for agent all over the world.
3,Q: Can I get a sample before mass production?
A: Of course! FREE SAMPLE, after you confirm, then we will start production.
4,Q: How long can I got this sample?
A: Normally 5-10 days after receiving your Freight.
5,Q: How about your delivery time?
A: 10-30 working days
6,Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
7,Q: How about the quality grantee period?
A: One year.
8,Q: OEM is available?
A: Yes.